Fabrication Of 304 Stainless Steel Pipework

​

Precision Arc Engineering fabricated and welded 2-inch, 3.5-inch and 4-inch sch10 (2mm wall thickness) 304 stainless steel pipework to supplied drawings. All pipework was purged with Argon high purity gas to ensure clean internal welds and to avoid contamination.

​

Installation Of 304 Stainless Steel Pipework & Instruments

​

We installed the PAE-manufactured pipework to supplied drawings. The final stainless steel pipework fabrication was completed on-site to ensure the correct alignment. Pipework was then removed and welded back at the PAE workshop.

​

All clamps, bolts and gaskets (PTFE) were supplied by Precision Arc Engineering to avoid any complications.

​

Fabrication of 304 Stainless Steel Manifold

​

PAE fabricated and welded a 2-inch sch10 304 stainless steel manifold to supplied drawings. All pipework was purged with Argon high purity gas to ensure clean internal welds and to avoid contamination.

​

The stainless steel manifold was capped both ends with 2-inch tee on the inlet.

​

4 off manifold outlets were finished on a 0.25 BSP thread.

​

Fabrication & Installation of Mild Steel Balcony

​

We fabricated, welded and installed a mild steel balcony from 30x30x2mm box section handrail, with 4.5mm mild steel durbar anti-slip flooring, with 40x40x3 mild steel box section support frame. 100x3mm kick plate was fitted to internal edge.

​

The balcony was galvanised and powder-coated matt black.  We always recommend galvanising before powder-coating for external use. Our PAE structural engineer approved all drawings prior to fabrication.

​

Fabrication and Installation of Mild Steel Stairs

​

We fabricated, welded and installed mild steel stairs from 200x75x23 channel with durbar anti-slip treads and 30x30x2 mild steel handrails. The stairs are a bolt-together system.

​

The stairs were galvanised and powder-coated matt black, as the mild-steel balcony.